Touch > Tools > Basic Tools > Terminal Settings > Peripheral List > Scale > Edit
Description
Used to configure Scale settings.
To Be Considered
- The DATALOGIC Magellan 8400 Series Scale/Scanner requires a direct connection of the RS232 cable to a RS232 port. USB to Serial converters do not appear to work.
Pre-Requisites
- If no Scale exists in the list of Peripherals, then it will need to be added.
- If NMI Compliance is required, make sure the NMI Compliant Terminal Setting is selected.
Scale Settings
This screen is accessed from here.
- Disabled - Select to ensure the peripheral is disabled.
- No OPOS Scales Installed - Choose OPOS to use OPOS drivers for the attached scale.
- NCI Protocol - Select to enable the Settings button, to open the RS232 Settings screen and configure.
- CAS AP-1 - Select to enable the Settings button, to open the RS232 Settings screen and configure.
- ICL Actual - Select to enable the Settings button, to open the RS232 Settings screen and configure.
- Timeout - Normally set to 10 seconds.
- Test - Select to test.
- Open Service Object Manager - Select to open the Service Object Manager screen.
Related Topics
- POS - Scale Operation
- POS Configuration Index - Peripheral/Printer Related Configuration
- POS Operation
- POS Operations
- Touch Toolbar and Tools
- Reseller Help - For Scales information
- Terminal Settings
